Add a bbPress Forum to Your WordPress Site on Tanzahost
Install WordPress with bbPress from the catalog, create your first forum, set who may post, and check it all works. Steps, checks and fixes.
Updated 20 Nov 20266 min read
Your customers ask the same questions again and again, and the answers disappear into email threads. This post shows you how to give your WordPress site a discussion board, where people open topics, reply to each other and keep a member profile.
By the end you have a WordPress site with a bbPress board under the same login as the rest of the site, its own MySQL database made and connected for you, a free address with HTTPS, and a place in the project's backups from the first day.
What you need before you start
A Tanzahost project with an Overview page. Every step below starts there.
The Admin email you will sign in with. The board shares one login with the rest of the WordPress site, so this is the email you use for everything.
A name for the app.
forumsays what it is, and you will see this name on its card in the project.A few quiet minutes after Install. Until the card reaches Ready, the board waits where only you can see it, so do this before you tell anyone the address.
One note on cost. The board is made with 512 MB of memory and half a processor. Those ceilings move whenever you want them to, and you pay for the time the board really uses, not for the ceiling. The limits page says more about the ceilings and how they are measured.
The example: Asha's board
Asha's customers keep asking her the same questions. She gives the site a board of its own, names the app forum, and works through the steps below from start to finish. At the end she has one board, one login, and one place to pin the answers.
The steps
Open Add a service on the Overview
In the project, open Add a service on the Overview and choose From the catalog. The catalog holds everything you can add to a project; the board is one item in it.
Find WordPress with bbPress and press Install
Search for WordPress with bbPress, or find it in its category, and press Install. Each plugin version is taken at an exact number and checked against its own checksums before it is ever run, so what gets installed is exactly what was checked.
Name the app and give the Admin email
Name the app (forum says what it is), then give the Admin email you'll sign in with. Use the email you actually read. It is the sign-in for the WordPress admin area and for the board behind it.
Check the limits and the monthly estimate
Check the limits and the monthly estimate before you press Install. The board starts at 512 MB of memory and half a processor. A forum is light work, so those numbers are a starting point, not a ceiling you are stuck with.
Copy the one strong password
One strong password appears on the screen: copy it before you press I've saved it. That password is the other half of your sign-in with the Admin email. Put it somewhere safe before the screen goes away.
Wait for the card to reach Ready
The card shows Ready when the board is up. Until then the board waits where only you can see it. You can open its admin page while you wait, but nobody else can reach the board yet.
Open its admin page
Open the board's /wp-admin/ from the card's Open its admin page button and sign in with the Admin email and the password you copied. From here the board is managed like the rest of a WordPress site.
Create the first forum
Go to Forums → New Forum. This is the first place people will talk. Give it a name your customers would search for, such as "Order questions" or "Product help".
Set who may post and how topics behave
Go to Settings → Forums. This is where you decide who may post, and how topics behave: how they are listed, how replies are handled, what a new topic looks like.
Let visitors register
Go to Settings → General and let visitors register if the board is open to everyone. Skip this if only existing customers should post.
That is the whole setup. From then on it runs like any forum: you pin what matters, close what's done, and clear the occasional spam reply from Topics.
What to check that it worked
Run through these five checks before you share the address.
The app card shows Ready.
Open its admin page takes you to
/wp-admin/, and the Admin email and password you copied sign you in.Forums → New Forum saved the forum you named, and it appears in the forum list.
Settings → Forums shows the posting rules you chose, not the defaults you meant to change.
If the board is open to everyone, Settings → General shows that visitors may register.
Also remember the board sits in the project's backups from the first day, alongside the WordPress site underneath it.
Mistakes people make and how to fix each
Pressing I've saved it before copying the password. One strong password appears on the screen once. Copy it before you press I've saved it. If it is already gone, treat the password as lost and keep the next one where you will find it.
Naming the app something vague. test, app2 or thing tells you nothing a month later. Name it forum and the card in the project reads like a label instead of a puzzle.
Telling customers about the board before the card reaches Ready. Until Ready, the board waits where only you can see it. A shared link at that point is a link to nothing. Wait for Ready, then share it.
Looking for a second login for the forum. There is not one. Topics, replies and member profiles all sit under the same login as the rest of the site, so the Admin email and password you already have are enough.
Leaving registration open when the board is for customers only. If everyone can register, everyone can post. Go back to Settings → General and turn registration off again.
Forgetting the board after launch. Pin what matters, close what's done, and clear the occasional spam reply from Topics. If a conversation matters, export it now and then, so you keep a copy outside the daily backups.
Next
WordPress with bbPress is the page this post follows. Worth a read before you install.
limits covers the memory and processor ceilings, and what you pay for the time the board really uses.
WordPress says more about the site underneath the board.
One last note on ownership: bbPress belongs to its makers and keeps its own licence, GPL-2.0-or-later.
Written with Sali, checked by our team.